GET NOTIFIED WHEN A SPILL IS DETECTED ON YOUR RIG
Rig Guardian Spill Detector
Perfusion spills don’t blend well with microscope optics and mechanics. The NeuroGig Rig Guardian notifies you when a spill occurs – you can protect your setup against potentially costly damage.
How does it work?
Position one or both of the two included sensors where your setup is most likely to flooding, and connect the sensors to the battery-powered controller.
When one or both sensors are exposed to solution (needs to be a conductive solution),
- a buzzer-alarm is triggered,
- along with an LED on the front panel of the controller.
- a custom notification gets sent to a designated phone (via an app – Android/iOS), warning you about the spill. The option of receiving an email is also available
The buzzer and LED switch off again once the spillage is cleared (the alarm can be deactivated whilst you clear the spill via the “Deactivate Buzzer” switch on the controller).
Sensor types:
When you purchase a Rig Guardian, two sensors are included. Either choose one of each type below, or two of either:
Chamber Aperture Sensor
3-D printed round frame with + and – terminals, to fit around your recording chamber (custom dimensions available)
Open-Terminals Sensor
3-D printed block with open terminals to position anywhere on your rig.
Features
- Ultra-low energy consumption in resting mode (typically lasting more than 12 months for fully-charged batteries)
- With warning notification sent to your phone when battery power drop below a pre-set level
- Sensor activation results in activation of:
- LED warning light on controller
- Buzz alarm
- Phone notification (via Pushover app)
- Customizable sensor format (please send your suggestions)
12 months warranty
Benefits
Save on what could be thousands in damages and repair costs by always cleaning spills. The Spill Detector is available at a cost of £195 (approximately $250)
With the Rig Guardian Spill Detector on your setup, it is easier to keep your setup in pristine condition. This translates to better productivity and better data
The Rig Guardian is super-sensitive, which means you can rest assured that even minor spills will be detected if the sensors are strategically well-positioned.
Why buy the Rig Guardian Spill Detector from NeuroGig?
The Rig Guardian is a small hardware investment, with potentially huge benefits in protecting your setup. Spills are often not easily visible on your setup, which makes this an essential tool on any wet rig.
We test our devices before it leaves our workshop, and offer support and a 12 month warranty on work and parts